Scale indicator with 4 channel is usually used in the field bus, through the analog signal or RS485 output, to transmit the weight to the PLC or MODBUS, it allows to connect 4 load cells and read and diagnose the data at the same time.
•Car weighing inspection
•Temporary Weighing
•Modular Weighing System
•Warehouse
1.The guide rail is a shape design, and the installation is more convenient.
2.Up to 16 350 ohm load cells can be driven in parallel.
3.The built-in bridge load cell outputs digital signals and has four sensor sampling channels.
4.Standard RS232 and RS485 interfaces, CAN network port is optional.
|
Brand |
SkywardMeasures |
|
Model |
WCM0401 |
|
Function |
4 channel |
|
Measurement Signal |
4 channel with -20mV~20mV, Each can drive 4 load cells with 350 ohm |
|
Sampling Frequency |
500Hz |
|
Detection Accuracy |
Level III |
|
Communication Interface |
RS232/RS485, Optional with Ethernet or other module |
|
Nonlinearity |
0.005%FS |
|
Resolution |
1/500000 |
|
Sensor Voltage |
5V |
|
Power Supply |
21-26 Vdc |
|
DI/DO |
2 DI/2 DO, Low level active |
|
Weight |
About 0.1kg |
|
Dimensions |
92*72*59 mm |
|
Power Consumption |
< 5W |
