Load cell pin is a hollow section circular shaft that is subjected to shear force. The double shear resistance strain gauge is pasted at the center of the groove in the center hole. It has two measurement methods of group bridge, two grooves. The double-shear resistance strain gauges at the two locations together form a Wheatstone bridge, or form Wheatstone bridges separately and then measure in parallel.
•Lift
•Oil rig
•Tank weighing
•Silo weighing
•Smart release hook
1.The elastic element is an integral hollow section circular shaft, with compact structure and simple geometric shape, which is easy to process with high dimensional and shape accuracy.
2.When designing a large-capacity pin-type load cell, it is installed on the axial center hole, and the double-shear resistance strain gauge can be pasted in the hole, which is well protected and can be vacuumed and filled with inert gas. sealing process.
3.When the hollow section shaft pin is subjected to vertical and horizontal bending, the section with zero bending moment is in the same section
4.Load cellpinmanufacturer, free technical support.
|
Brand |
SKYWEIGHING |
|
Model |
WLC026 |
|
Rated Load |
0.5/1/2.5/3.5/6.5/15/25/50/100/250/500/750/1000/1500Ton |
|
Sensitivity |
(1.0±0.1%) mV/V |
|
Operating Temp |
-30~+70℃ |
|
Combined Error |
±0.5% F.S |
|
Ultimate Over Load |
400%F.S |
|
Zero Balance |
±1% F.S |
|
Input Resistance |
400Ω±20Ω |
|
Element Material |
Alloy /Stainless Steel |
|
Cable |
5-16m |
|
Insulation Resistance |
≥5000MΩ |
